Updating custom firmware psp 1000

Rated 4.69/5 based on 990 customer reviews

Now press the R shoulder button while turning back on. When that menu comes up, go to Extends, and navigate down to 'Pandora' press X on it.Now navigate down to Pandora Battery, and press X, then wait about 10 seconds and press X again. Copy the 620PRO_Permanent, PROUPDATE and the Fast Recovery folder to PSP/GAME. The patch was now completely installed and the [b]flash0: / vsh / module / was renamed to vshmain.prx! Congrats..you're on 6.20 PRO-B4 Permanent, enjoy it . 1 is that you buy a Hybrid 2-in-1 Battery off the internet which can be used as both a Normal PSP Battery or a Pandora Battery.You can buy one here: ( when you receive it, please skip to step 3, simply because the rest of this part has noting to do with you, unless you are going to make a Pandora Battery for some stupid reason!

Now copy and paste the 'recovery.prx' file in there to the 'seplugins' folder on the PSP. Now fully power off the custom firmwared Phat PSP by holding up the power button. press X and then navigate down to '[VSH]' and press X on it to enable on it. Now on your PSP XMB ( cross media bar ), hold the R shoulder button and press the Music Note button.

Keep this file for safety reasons, if you'll have a brick you can use that file to recover your psp! Launch the 6.20PRO-B4 Permanent Installer again, press X and then O.

The original flash0: / vsh / module / was now backed up to ms0:/ or ef0: / Because some guys asked me about a TUT how to install 6.20 PRO-B4 Permanent, I made one. But your PSP Unit must be 5g or lower For this, you will need: - PSP 1000, 2000, 3000, 4000 or PSPgo -6.20 PRO-B4 -Official PSP Firmware 6.20 -6.35/6.31 to 6.20 Downgrader if you aren't on Firmware 6.20 -PSP Module Checker 3.0 to check your PSP unit Tutorial 1.

The only thing that will remove this is by upgrading to a newer official firmware, which at the time of writing does not exist.

Because some guys asked me about a TUT how to install 6.20 PRO-B4 Permanent, I made one. But your PSP Unit must be 5g or lower For this, you will need: - PSP 1000, 2000, 3000, 4000 or PSPgo -6.20 PRO-B4 -Official PSP Firmware 6.20 -6.35/6.31 to 6.20 Downgrader if you aren't on Firmware 6.20 -PSP Module Checker 3.0 to check your PSP unit Tutorial 1.

Leave a Reply